29 August – 14 Sept 2015

Melissa Atkins with Mini
Melissa Atkins with Mini

The new valve cover gaskets and upper gaskets arrived.  I am going to install the latter, and see if they help, so, I decided to give Mini an update and a test run.

 o I adjusted the brakes
 o removed the grille and verified their are no leaks around oil filter
 o replaced the grommets under the valve cover hold downs.
Went for run
 o ran fine, after warmed up
 o brakes worked well
When I pulled into the garage, I went to open the bonnet to check for oil, but I did not have to: it was leaking out.
When I opened it up, I observed that the valve cover gasket was askew. (see photo below)
When I removed the hold downs, I may have moved the cover and disturbed it.
At any rate:
 o I shall remove cover
 o clean surfaces
 o replace with new gasket, glued to the cover
 o add oil
 o and retest
(N.B.: I don’t think that Melissa from California closets was the cause…)
gasket mal function
gasket mal function

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Google photo

You are commenting using your Google account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s